Pepperl fuchs Proximity Sensors


          Proximity Sensor

Inductive sensor

Inductive sensors are used for accurate and non-contact detection of metal objects inside machine or automation equipment. There are many options such as flat and protruding head, increased sensing distance, high temperature and explosion resistance and safety according to your application needs.

Features of All Standard Pepperl Fuchs Inductive Sensors:

Flat or threaded stainless steel housings
Reverse polarity and short circuit protection
LED status indicator
Connection types including M8, M12 or terminal connection models
PVC, PUR or silicone cable models
Models with 2, 3, 4 wire DC, AC, NAMUR and AS-Interface versions

Features of Application Specific Pepperl Fuchs Inductive Sensors:

Analog output models with 4-20 mA output signal
Integrated speed monitor operating up to 100 Hz
Pressure sensors up to 500 bar
Sensors approved for use in Ex areas where gas and dust are concentrated
Models with stainless steel sensing surface
Degree of protection up to IP68 / IP69k (liquid immersible / high pressure water jet resistant)
Surface resistant designs with PTFE coating
Reduction factor 1 detects all metals at the same distance
Special iron-containing and non-ferrous detection models
Safety sensors
Extended temperature range: -40 ° C to + 250 ° C

Capacitive Sensors
They can be used to detect almost all other materials as well as metal objects. These sensors are often used in applications such as level and flow control for the detection of liquids, particulate materials and dust.

Features of Standard Pepperl Fuchs Capacitive Sensors:

12, 18 and 30 mm cylindrical stainless steel or plastic housings
5 mm thick, 80 mm x 80 mm x 40 mm rectangular and long-range models
3-wire DC sensor outputs and NAMUR output types
Hazardous zone approved models

Magnetic Field Sensors
This range consists of sensors with M12 body and a non-contact piston detection sensor model for use with steel hydraulic cylinders. With these magnetic sensors, reliable magnetic detection of the pistons is possible. They can be installed effortlessly without mounting holes or holes in the cylinder.